Fusil airsoft TR16 MBR 556WH - Avanzado, Tecnología G2, Full metal, Gatillo electrónico

¿Qué puede ofrecerle esta arma?

El arma pertenece a la categoría más alta G&G Advanced. Tiene un chasis totalmente metálico de muy alta calidad que confiere al arma robustez y durabilidad. Para un funcionamiento fiable de la réplica, el fabricante recomienda la batería Lipol de 11,1 V. El arma tiene un conector clásico Mini-Tamyia.

El rendimiento del arma es de unos 125 m/s (410 FPS).

En general, la mano de obra externa y los materiales son de un nivel muy alto. Sin embargo, la introducción de la G&G TR16 no termina allí. Al contrario, lo importante se esconde en el interior...

Sistema G2 - el mechabox del futuro

En su interior se encuentra una mechabox metálica G2 completamente nueva y mejorada con rodamientos de bolas de 8 mm, ruedas de acero y muelle M120. Adicionalmente equipada con electrónica - mosfet situado en el tubo de culata y G2 E.T.U. (Electronic trigger unit) en la mechabox. Contactos de disparo internos con microinterruptores electrónicos.

• refuerzo del 70% del esqueleto del mechabox en las zonas de mayor tensión *
• Muelle de cambio rápido
• Doble junta en culata y boquilla para un mayor rendimiento
• Interruptor reversible de disparo y liberación del cargador para un funcionamiento más rápido
• Desconexión del motor en caso de cargador descargado o vacío
• Engranajes helicoidales mejorados para mayor potencia, menor calor y consumo de energía.

• MOSFET reducido en un 50%* para más espacio en el tubo de culata
• ETU (unidad de disparo electrónico) mejorada para un disparo más sensible y para evitar abolladuras en el gatillo
• Opción de modo BURST - ráfaga de 3 ó 5 disparos
• Indicación acústica de bajo voltaje de la batería y mal funcionamiento del mechabox

* en comparación con la versión anterior

AVISO
Cuando ajuste el hop-up, empiece siempre con el hop-up máximo permitido. La rueda de ajuste se gira hacia la izquierda - un paso por encima. Dispare algunas bolas, tire de la rueda de ajuste ligeramente hacia la derecha. Repita el procedimiento hasta que consiga el efecto de hop-up deseado. Tirar demasiado del hop-up (hacia la derecha) puede provocar el "estrangulamiento" del arma y, en casos extremos, daños en las piezas internas (pistón, peine, engranajes).
ESTOS DAÑOS NO ESTÁN CUBIERTOS POR LA GARANTÍA.

We present the best gun ever produced by the G&G - the TR16 MBR 556WH with the new G2 mechabox.

What can this gun offer to you?

The replica belongs to the highest category of G&G Advanced. It has a high quality all-metal chassis that delivers robustness and durability. Thanks to the Crane LMT plastic collapsible stock, you adjust the length exactly for you - it can be set in six positions. Here also, when the button is pressed and the rubber foot is tilted to the side, is space for the battery. For reliable operation of the replica, the manufacturer recommends 11.1V Li-Po (type MiniCQB). The replica has a classic Mini-Tamyia connector. Additionally, there is a storage compartment in the stock support, where you can insert, for example, replacement batteries into the flashlight.

The metal upper and metal bottom parts of the VLTOR style body are top-stitched. There are no burrs or traces of casting. The grip and the magazine are an ergonomically shaped rubber grip for better grip. You can find other nice enhancements on the body of the gun - the two-sided fire selector and magazine release. By pulling the charging handle, which is lightweight with a latch and looks really luxurious, you open the dust cap of the bolt. Here is a default access for hop-up settings. The improvement is that you do not have to hold the charging handle for the hop-up setting yet - the metal-immitting bolt remains locked in the open position and the hop-up space is so loose. The bolt release is on the left.

On the upper part of the weapon is a standard RIS with folding sights for installation of optics / red dot and other equipment. The bottom part of the body is laser-labeled with the manufacturer's logo and a unique serial number.

The power of the weapon is about 125m/s (410 FPS). Suitable ammunition is 0,25g BBs.

Overall, external processing and materials are at a very high level. But the performance of the G&G TR 16 does not stop. On the contrary, that important is hidden inside ...

G2 System - the mechabox of the future

Inside the gun is a completely new and improved metal gearbox G2 with 8mm ball bearings, steel gears and M120 spring. Additionally equipped with electronics - a mosfet located in the stock tube and G2 ETU (Electronic trigger unit) in the gearbox. Internal trigger contacts with electronic microswitches.

• 70% reinforcement of the gearbox frame in the most stressed parts *
• Quick change spring
• Double seals on cylinder head and nozzle for higher performance
• Double-sided fire selector and release of the magazine for faster operation
• Disconnecting the motor in the case of removed or empty magazine
• Improved oblique gears for higher performance, lower heating and power consumption.

• MOSFET reduced by 50% * for greater space in the stock tube
• Improved ETU (Electronic trigger unit) for a more sensitive trigger and to prevent triggering of the trigger
• BURST mode option - 3 or 5 shots
• Acoustic signaling of low battery voltage and gearbox faults

 

* compared to the previous version

ATTENTION
Once you set up the hop-up alway set the hop-up to minimal - the adjustment knob is turned to the left. Shoot several BBs, gently pull the adjustment knob to the right. Repeat the process until you reach the desired hop-up effect. Too much hop-up (knob turned right) can cause the BB jam and, in the extreme case, piston damage.
THERE IS NO WARRANTY FOR THIS TYPE OF DAMAGE.